What is 10.0.0.1?
The 10.0.0.1 IP address belongs to the 24-bit block of private IP address, which are used for local area networks (LANs) and it can be used more than once. It is not possible to route private IP addresses as we can do for the public IP address, through the internet.
Network administrators and internet providers have been relying on various methods of remapping one IP address space into another and using private IP addresses such as 10.0.0.1 as substitutes for public IP addresses. Eventually, the IPv4 communications protocol will be entirely replaced by its successor, Internet Protocol Version 6, or IPv6 for short, but that will take some time. Currently, only about 25 percent of internet traffic happens through IPv6.
10.0.0.1 is an IP address of Xfinity router IP. This IP address comes under private Class A IP address range and is decided by the IETF and IANA. It is the default gateway address for Xfinity router admin settings. Apart from 10.0.0.1, there are other IP addresses like 192.168.1.1, 192.168.0.1, 10.0.0.0.1, and 10.1.10.1 that routers use as their default gateway.
How to Login into Comcast Xfinity Router?
1) IP Address
Open any browser and type the URL https://10.0.0.1/ in the search box which will direct you to the Xfinity gateway page.
The login screen will appear. Now enter the default username and password for your router.
The default usernames may be any of these:
The default values for the password may be:
After you log in, you will be directed to the home page. Now go to the router wireless settings which will allow you to configure changes. Go to the Network tab and configure changes like Dial-Up connection/DSL method, SSID and Security settings.
4) DNS Settings
To change the DNS settings enter the default username and password. By default, the DNS is 22.214.171.124 and 126.96.36.199 given by Google.
Common Login Issues
Following are the problems commonly faced by people:
1) 10.0.0.1 does not connect On my Xfinity Router
For users to connect to the 10.0.0.1 Ip address, there should be no device which uses 10.0.0.1 as it’s the default gateway. To know whether any device in your network uses 10.0.0.1 use command prompt CMD on windows. To open command prompt press windows+R and enter cmd in the search bar. Once the command prompt is open type ipconfig and press enter. For MAC, you should be using the ping command, you can use the ping command in terminal. To get a positive result, there should be a device active in your local network to get the ping.
2) Comcast Default Gateway IP “10.0.0.1” took too long to respond
This problem arises due to a loose wire or some issue with your router hardware. Such issues happen due to prolonged usage and frequent power failures. For fixing this issue, reboot your hardware, your system and also check if there are any loose connections. If nothing works, contact your router’s manufacturer.
3) Trying to login to my admin panel for Xfinity. Shows the wrong SSID and logs me into someone else’s network. Comcast can’t help. What to do?
The issue arises due to Comcast using a single line split into 20 different areas. The best way to solve this is to:
- Disable the wifi on your device.
- Connect your PC/laptop directly with an ethernet cable.
- Type the router’s default IP address (Can be found by using ipconfig command in windows/MAC)
- Now change the IP address. Ex: Your router may be involved in an IP address conflict so better change it. Like if it was 10.0.0.1 earlier, then change it to 10.0.0.2
4) How do I access my Xfinity router settings?
You need the default IP address to access your Xfinity Settings. It depends upon your Comcast Xfinity router model, whether the default IP address is https://10.0.0.1 or https://192.168.1.1 or https://192.168.100.1
5) What is the default admin password for Xfinity router?
The default username is admin and admin password for Xfinity router is password. Remember the username and password are case sensitive.
6) How do I find my password for my Xfinity WiFi?
To find the default password, you can check it on the box of a router and if the password doesn’t match, do a 30-30-30 reset and then use the default password.